Chain conveyer is used for conveying waste paper and pulp board to the pulper. 

Mainly used to process low-consistency pulp, ocCc, AoCC, old corrugated paper, old newsprint, market pulp,and broke paper. 

Mainly used for processing low-consistency pulp,continuouscontinuous pulping (Occ, AOCC), old corrugated paper, old newsprint,commodity pulp, and broke paper. 

ln the continuous pulping and cleaning system,the light impurities from the pulper are removed,and the PLC controls the automatic operation. 

Used for impurity separation, fiber and white water recovery incontinuous pulp slag discharge system. 

Used to remove various winding impurities in the pulper tank, such as ironwire, rope, cotton yarn, etc 

Used with ragger for cutting the garbage rope twisted by the ragger 

Removal of impurities discharged from the trash well of continuous pulper,suitable for ocC and mixed waste paper. 

Grab the impurities such as plastic, tape, rope etc. in the pulper tank. 

lt is mainly used to remove various impurities such as oldironware,book nails, ash block, sand, broken glass block, etc.in order to reduce the abrasion of the rear equipment,purifythe pulp and improve the product quality. 

lt is used to loosen the waste paper bags, and to remove dust and impurities from the waste paper.lncluding bulk dust collector, upper dust removal system,bottom paper dust separation system. 

Mainly used in ONP, OMG, MOW and high strength waste paper. 

The waste paper raw materials are continuously broken down in ahigh-consistency state and continuously screened and washed in alow-consistency state; the physical properties of the fiber are kept tothe maximum. 

Used in coarse screening system to remove light impurities andheavy impurities of larger size in the system. 

lt is used in the last stage of coarse screening system to separatethe tailings of coarse screening system, wash the light impuritiesafter the equipment in the previous stage is clarified, recover thefibers and discharge the light impurities. 

lt is used in the coarse screening system to process the tailings of the coarse screen, to perform secondary deconsolidation of the unbroken paper sheets and fiberbundles,so that the fibers and impurities are fully peeledoff, and the light and heavy impurities are separately sentto the subsequent processing equipment. 

lt is used in the last stage of coarse screening system to separate thetailings of the coarse sieve system, wash the light impurities after theequipment in the previous stage is clarified,recover the fibers anddischarge the light impurities. 

lt is used in the pulping system to separate the tailings of the coarsesieve system, wash the light impurities after the previous equipmentis deconsolidated, recover the fibers and discharge the lightimpurities. 

lt is used in the last stage of the coarse screening system to separate the talings of the coarse sieve system, wash the light impurities after the equipment in the previous stage is clarified, recover the fibers and discharge the light impurities. 

Used to separate long and short fibers in the system. 

Used for fine screening system, fine screening of pulp, effectivelyremove all kinds of fine impurities such as stickies and lightimpurities. 

Used for screening pulp in front of paper machine, it can effectivelyevacuate pulp mass,prevent fiber flocculation,and thus improve paper quality. 

Mainly used to effectively separate solids and filtrate. 

Used in the final stage of the selection system to recycle the tailingsof the fine screening system again to reduce fiber loss. 

Gravity cylinder thickener is used for thickening and washing the low consistency pulp such as wood pulp, cotton pulp, straw pulp and waste paper pulp. 

Mainly used for washing and consistency of low concentrition pulp. 

lt is mainly used for washing and consistency of low-consistency slurry, and can also be used for white waterfiber recovery. 

CDI Multi Discs are mainly used for washing and thickening of low consistency pulps and also for fiber recovery from white water. 

VDF multi discs are mainly used for washing and thickening of low consistency pulp, and also for fiber recovery from white water. 

Used for washing the deinking pulp. 

Used for dewatering and concentrating various pulps 

Used for dewatering and concentrating various pulps. 

Widely used in pulp washing, dewatering, consistencyand wet pulp sheet making, especially widely used in heat dispersion system of waste paper pulp,high-consistency bleaching of mechanical pulp, regrinding of coarse residue, etc. 

lt is used to remove the free ink particles in waste paper pulp,as well as some light impurities such as fillers and stickies.The tank is a vertical multi-stage series structure. 

lt is used to remove the ink particles in the free state in waste paper pulp, and some light impurities such as fillers and stickies.The tank body is a horizontal two-stage, multi-stage serial structure. 

The medium-consistency bleaching tower is a medium-consistency pulp bleaching reaction device, mainly used for medium-consistency FAS reduction bleaching. 

The disc heat disperser is the core equipment in the disc heat dispersing system, which is used to complete the heat of impurities such as stickies in the waste paper pulp. 

The heat dispersing system is used in the preparation system of waste paper pulp line, and the pulp is processed under the condition of high temperature and high consistency through the method of combining mechanical and heat dispersing. 

Low-consistency pulp, mainly used for deflaking pulp board and broke paper. 

NDR series refiner is used for continuous refining of chemical wood pulp, mechanical pulp and waste paper pulp. 

lt is mainly used for continuous beating of chemical wood pulp, mechanical pulp, and waste paper pulp; it is a continuous beating equipment for coarse and fine grinding of pulp in the papermaking industry, and can also be used as pulp slag. 

Used for high-consistency refining pulp of wood fiber and non-wood fiber,such as wood pulp, straw pulp, reed pulp,bagasse pulp, bamboo pulp, cotton pulp, branches and other pulp. 

Used for agitating and mixing of pulp. 

Mainly used for continuous or intermittent treatrment of wet and dry paper in paper machines. 

Sludge screw press dewatering system is mainly used for the high dryness of sludge dewatering. 

            Screw Press Sludge Dewatering System 

The blade has a self-cleaning function, which is suitable for the drying treatment of materials with a certain viscosity. 

Used in the final stage of the selection system to recycle the tailingsof the fine screening system again to reduce fiber loss.